
30WT RACE OIL (10W30)
Red Line 30WT Race Oil (10W30) | High-Performance Synthetic Lubricant
Maximize horsepower and engine protection with Red Line 30WT Race Oil (10W30). Formulated with 2200+ PPM zinc/phosphorus and polyol ester base stocks for elite racing performance.
Red Line 30WT Race Oil is formulated specifically for motorsports applications where monitoring oil temperatures indicates a 10W30 viscosity requirement. Unlike standard passenger vehicle motor oils, this high-performance racing formula contains specialized detergents optimized for increased lubricity and reduced detonation risk.
Built around robust polyol ester base stocks, the oil delivers elite thermal stability and high film strength, ensuring your engine remains protected when exposed to excess fuel dilution. Each batch is packed with over 2200 PPM of zinc and phosphorus anti-wear additives to safeguard high-load valve trains and cam lobes. Offering multi-grade performance that behaves like a 10W30, it balances quick protection at startup with steady viscosity under intense heat, resulting in lower operating oil temperatures and increased horsepower output. Please note: due to lower detergent content, this oil is strictly intended for racing use and requires more frequent change intervals than standard street oils.
Best Uses:
-
Circuit Track Days & Road Racing: Providing extreme film strength and wear protection during prolonged high-RPM track sessions.
-
Drag Racing: Maximizing horsepower output and throttle response for quick-acceleration setups.
-
Professional Engine Builders: Protecting high-performance, high-compression custom racing engines.
-
Dirt Track & Oval Racing: Delivering consistent lubrication and lower oil temperatures under severe load conditions.
-
Motorsports Dyno Tuning: Unlocking 2-4% more power compared to standard oils of comparable viscosity during tuning runs.
5 Key Features:
-
High Anti-Wear Additive Package: Contains no less than 2200 PPM of combined zinc and phosphorus for maximum engine component protection.
-
Polyol Ester Base Stocks: Provides exceptional thermal stability and film strength when subjected to high heat and fuel dilution.
-
Multi-Grade Performance (10W30): Delivers reliable viscosity scaling that yields 2-4% more power than conventional oils of similar weight.
-
Specialized Detergent Blend: Engineered for improved lubricity and reduced engine detonation risks under heavy loads.
-
Extreme Low-Temperature Flow: Features a pour point of -58°F (-50°C) for safe, quick protection during initial startup.
5 Key Benefits:
-
Unlocks Horsepower: Proven multi-grade design frees up 2-4% more power compared to standard viscosity oils.
-
Superior Thermal Control: Helps lower overall operating oil temperatures during intensive racing conditions.
-
Enhanced Startup Protection: Rapidly flows at low temperatures to protect critical metal surfaces the moment the engine fires up.
-
Resists Fuel Dilution: Maintained film strength prevents breakdown even when exposed to excess fuel in high-performance builds.
-
Advanced Engine Cleanliness: Keeps vital internal components clean and free of varnish under aggressive racing environments.
If you watch your oil temp, you know this viscosity is likely the right one.
Racing oils provide more wear protection than motor oils for passenger vehicles, however, these products contain fewer detergents and are not suitable for street use
- Reformulated for improved frictional properties
- Special detergents for improved lubricity and less detonation
- Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution
- Each of these products has no less than 2200ppm of zinc and phosphorus for antiwear
- Each race oil product is a multi-grade, offering 2-4% more power than oil of a similar viscosity - 20WT is a 5W20, 30WT is a 10W30, 40WT is a 15W40, 50WT is a 15W50
- Improved protection at startup, lower oil temp, cleanliness
- Remember to change these oils more frequently than regular motor oils
TYPICAL PROPERTIES
| Phosphorus, Avg PPM |
2000 |
| Zinc, Avg PPM |
2250 |
| SAE Viscosity Grade |
10W30 |
| Vis @ 100°C, CSt |
10.0 |
| Vis @ 40°C, CSt |
64 |
| Viscosity Index |
141 |
| CCS Viscosity, Poise, @ °C |
34@-20°C |
| Pour Point, °C |
-50 |
| Pour Point, °F |
-58 |